POW▪R▪ENTRY - Forcible Entry Tool

The POW•R•ENTRY™ Fast Breach and Entry Tool is a low velocity, indirect acting tool designed to enable police, firefighters, military, and emergency response personnel quick safe entrance through locked doors, gates, security bars, fences, padlocks and other locked devices.  Using a ten shot .27 Caliber low-velocity, powder-actuated strip load, the POW•R•ENTRY™ develops up to 30,000 PSI of force at the point of contact.

The POW•R•ENTRY™ uses specially designed breaching modules with drive/cutting heads that move at speeds over 200 feet (60m) per second.  No parts separate from the tool nor are there flashes or explosions. Figures 1a and b. show pictures of the components of the POW•R•ENTRY™ assembled and partially disassembled

Click here for a full product description>>
Click here to see more POW▪ R▪ENTRY in action>>.

• Size: With Flying Chisel attached19.5” (495mm) X 1.75” (45mm) X 6.25” (159mm)
• Weight / tool: Loaded tool with flying chisel attached 6.4Lbs (2.9Kg)
• Weight / full kit: Full Standard Kit in custom soft carry case. 15Lbs. (6.8Kg) Deluxe Kit 17Lbs (7.7Kg)
  
• Chisels and Piston: Forged S-7 Tool Steel, specially heat treated for impact stresses
  
• Striking Force: 30,000Lbs. PSI (13,600+ Kg) at chisel head with red powder loads
• Chisel Speed: 200 Feet per second. Full extension time, < .0013 second
• Chisel and Rod Movement: Flying Chisel: 3” (75mm), Boltbuster Chisel 1” (25mm), Lockbuster Rod 2.75” (69mm)
• Recock Time for next shot: Less than 1 second
• Power Loads: .27 Cal. 10 Cartridge Low Velocity Strip Loads. #3 (Green) for training, #5 (Red) For Operations
• Tactical Carry Bag: Padded black nylon, with heavy duty zipper and quick release Velcro holders and adjustable shoulder strap.  Includes individual zipper compartments for lube / cleaning container, literature and miscellaneous parts. Removable accessory pouch for carrying backup components are included with the Deluxe Kit and shoulder strap.
• Accessories/Spares, Standard Kit. 1 Urethane Spring, 2 half inch nylon buffers, 3 reset pins, cleaning lube and cleaning kit, eye Protection goggles. (Contact IMLCORP regarding conditions for including powder strip loads with orders)